THE WORLDS LIGHTEST INFLATABLE CATAMARAN
The Spirit 1.0 PLUS offers all the advantages of its predecessor and more. The engine impresses with its high performance and minimum noise level. The compact power pack delivers 3 HP.
Additional 12 month warranty on top of 2 years standard warranty
Telescopic tiller for trapeze (98cm - 156cm)
Telecope tiller (96 - 132 cm)
Water repellent packing bag. All Smartkat parts fit into 2 bags.
The ultimate pump for your catamaran. The pump can be connected directly to the car batterie or to optionally available batteries. The pump works in two stages: 1st stage volume operation: In this mode, 460 liters are pumped per minute 2nd stage = compressor operation: After reaching a pressure of 40 mbar, the pump automatically switches to this mode,...
Comfort Seats including Mounting
12V NiMh battery with charger. The capacity of the metal hydride battery is precisely tailored to the hull size of your Smartkat. The charger can even be charged by your car battery. If necessary, the battery can be charged in an hour. The battery should be stored when it is not charged. There is no self-discharge and the battery has more cycles. In...
Battery Pack (Pb) including Charging Station
Double Action Hand Pump to inflate your Smartkat. We recomment to use this premium pump as we have a long positive experience with this manufacturer. The pump can be packed even into the bags. However we recommend our electric pump for an convenient setup as you also save time (as you inflate the hulls with the electric pump, you can already setup other...
Ladder to enter the Smartkat after swimming. This ladder supports you to easier climb onto the Smartkat again after swimming. Due to the strings the ladder can be compressed and easily stored below the trampoline.
Transport Trailer to transport setup Smartkat. Instead of the rudder, the trainer will be inserted in the rear frame bar. You pull the Smartkat on the bugspriet. This allows you to easily pull your Smartkat on shore.
Support Plate for motor and sail at the same time. With this support plate you can support the rigged Smartkat with an engine (electric or combustion engine). Sail boat rudder is still there to steer the Smartkat.
Support Plate for Engine / Motor. Allows you to use the Smartkat as a motor boat. Instead of the rudder the engine plate is mounted into the rear frame. You can attached an electric or combustion engine with a max. of 3hp. Important to know: You need to have a long shafted engine to reach below the water surface.
Including quick release skewer longer aluminum racing tiller. The trapeze is is attached to the mast where the shrouds are fixed and will be connected to the sailor's harness at approximately waist level. The trapeze allows you to ride out and stabilize the boat to reach a higher speed.